A working garden fountain is more than a decorative object — it is a small ecosystem of water, movement and light that requires the right components to perform at its best. Whether you are setting up a new Italpark fountain or enhancing an existing one, choosing the correct garden fountain accessories makes the difference between a fountain that delights for decades and one that falls short of expectations.
This guide covers every category of accessory available in the Italpark accessories catalogue: hydraulic water kits, LED lighting kits, pumps, maintenance products, automatic refill kits and spray nozzles.
Water Kits — The Complete Hydraulic System
Each Italpark fountain is paired with a model-specific Water Kit that includes the hydraulic pump, all piping, joints and fittings pre-sized for that fountain. Kits are available in two configurations:
- TYPE 1 — standard pump sized for the fountain’s design flow rate and display height.
- TYPE 2 — higher-capacity pump for increased water column height and stronger visual impact.
Water Kits are identified by the SKU code format 2XXXKIn (where XXX is the fountain model code and n is the type). Because every kit is pre-configured for a specific model, there is no guesswork in matching pump capacity to fountain geometry. Installation requires only a standard electrical socket — no plumber, no mains water connection, since all Italpark fountains operate on a closed circuit.
LED Lighting Kits — Night-Time Transformation
After sundown, an Italpark fountain without lighting simply disappears into the garden. A LED Lighting Kit (SKU format 2XXXKLn) transforms the fountain into a focal point that rivals its daytime presence. Two families of spotlights are available:
- Neutral white (FL series) — 1W or 3W spotlights for clean, architectural illumination that highlights the marble granulate texture.
- RGB multicolour (FLM series) — 3W to 36W sets with wireless controller (ART. RC02) for dynamic colour effects.
Like Water Kits, Lighting Kits are fountain-specific: the correct number of spotlights and their mounting positions are predetermined for each model. TYPE 1 kits use a single or limited set of spotlights; TYPE 2 kits include a more extensive array for fountains with larger basins or multiple water levels.
Hydraulic Pumps — The Heart of the Fountain
For installers or customers who need to replace an existing pump or specify a custom hydraulic configuration, Italpark offers the full Sicce Syncra pump range — the same units supplied in the Water Kits:
- Syncra 1000 L/h (ART. PP02) — small display fountains
- Syncra 1500 L/h (ART. PP03) — compact single-basin models
- Syncra 2500 L/h (ART. PP05) — mid-range fountains
- Syncra ADV 5.5 (ART. PP09) — large single-basin models
- Syncra ADV 9.0 (ART. PP11) — multi-basin and column fountains
- Syncra HF 16.000 L/h (ART. PP13) — large centrepiece fountains
- Inox 32.000 L/h (ART. PP25) — monumental fountains
The warranty on Italpark pumps requires consistent use of anti-algae and anti-limescale treatment. Pump damage caused by limescale deposits from untreated water is not covered.
Water Treatment — Protecting Marble and Pump Alike
Two essential maintenance products are available for every Italpark fountain owner:
- ART. CH02 — Anti-Algae Powder 1 kg — added to the fountain water every 1–2 weeks in summer and every 3–4 weeks in cooler seasons. Prevents algae growth and limescale deposits on the pump rotor and piping.
- ART. SI05 — Glossy Hydro-Repellent Solution 1 kg — applied to exposed marble granulate surfaces once or twice a year. Creates a water-repellent film that reduces staining, moss growth and efflorescence, while giving the surface a light sheen.
- ART. SI01 / SI02 — Invisible Hydro-Repellent Solution 1 kg / 5 kg — same protection as SI05 with a matte finish, for customers who prefer to preserve the natural appearance of the stone.
Full guidance on annual maintenance is available in our Garden Fountain Maintenance Guide.
Automatic Refill Kits — Hands-Free Water Management
During summer, evaporation can lower the water level in a fountain by several centimetres per week. The Auto-Fill Kit (SKU format 2XXXKRAn) connects to a domestic cold-water tap and automatically activates a float valve whenever the water level drops below a set point. Once the correct level is restored, the valve closes.
Auto-Fill Kits are model-specific and designed to work in conjunction with the fountain’s drain. They are particularly recommended for fountains in full-sun locations or left unattended for extended periods, such as holiday residences.
Spray Nozzles — Customise Your Water Display
The character of a fountain’s water display depends above all on the nozzle. Italpark stocks a full range of spray heads compatible with standard pump outlets:
- Directional nozzles (UG01–UG03) — adjustable angle, single-jet; the most versatile option for column fountains.
- Bell / mushroom nozzles (UG04–UG07) — produce a wide, calm dome of water; ideal for shallow round basins.
- Foam jet nozzles (UG17–UG19) — aerate the water to create a white, frothy column; highly visible from a distance.
- Geyser nozzles (UG24–UG26) — powerful vertical jet with a geothermal effect; for fountains with deep central channels.
- Fan nozzles (UG13, UG27) — flat, wide spray; suited to wall-mounted or linear fountain designs.
- Specialty nozzles (TORNADO UG10, SNOW WHITE UG21, SUPER VOLCANO UG35) — for dramatic, high-impact displays.
Fiberglass Basins — Enlarging the Water Reservoir
For large fountains or those installed on uneven terrain, Fiberglass Basins (VV series, from €790 to €5,124) provide a concealed underground reservoir that increases the total water volume. A larger reservoir reduces the frequency of top-ups and smooths out evaporation losses, keeping the pump primed even during hot spells.
How to Choose the Right Accessories
The simplest approach is to start from the fountain model: every Water Kit, Lighting Kit and Auto-Fill Kit in the catalogue is indexed by fountain model code. Look for the suffix KI (water), KL (light) or KRA (auto-fill) followed by the model code.
For pumps, nozzles and maintenance products, the choice is independent of the model. Use the pump capacity table above as a reference, and always pair it with ART. CH02 for water treatment from day one.
The full range is available in the Italpark accessories catalogue. For personalised advice on which kit is correct for your model, contact the Italpark team directly — minimum order €250 + VAT, free shipping on orders over €3,000.
Frequently Asked Questions
Do I need a plumber to install garden fountain accessories?
No. Italpark garden fountains work on a closed circuit — water is continuously recirculated by the pump without any connection to the mains supply. All Water Kits and Auto-Fill Kits are designed for easy DIY installation. A nearby electrical socket is the only utility connection required.
What is the difference between a Water Kit Type 1 and Type 2?
Type 1 Water Kits include a standard single-pump hydraulic set sized for each fountain model. Type 2 Water Kits incorporate a higher-capacity pump and are recommended for larger fountains or installations where increased water flow and display height are desired. Each kit is model-specific and pre-configured for plug-and-play installation.
How often should I use anti-algae powder in my garden fountain?
Add ART. CH02 anti-algae powder every 1–2 weeks during summer and every 3–4 weeks in spring and autumn. Consistent treatment prevents algae growth and limescale build-up, which are the primary causes of pump damage. The pump warranty may be voided if limescale damage occurs due to untreated water.
Can I add a lighting kit to my fountain after purchase?
Yes. Italpark LED Lighting Kits are available for every fountain model in the catalogue and can be added at any time after the fountain is installed. Each kit is model-specific, including the correct number and positioning of LED spotlights for that fountain’s geometry. Both RGB multicolour (FLM series) and neutral white (FL series) options are available.
What does an Auto-Fill Kit do and do I need one?
An Auto-Fill Kit (KRA series) automatically tops up the fountain water level as it drops due to evaporation or splashing, without any manual intervention. It connects to a domestic water supply line and activates a valve when the level falls below a set point. It is particularly useful in summer or for fountains in sunny locations where evaporation is significant.
